Народ, помогите, посмотрите что не так!!! Нифига не работает любимая Опера!!!!! Причем теперь даже не ругается, т.е. просто чистый лист, а внизу в строке загрузки страницы, при нажатии "обновить" появляется "Отправка запроса www.tra-la-la.ru" на 5 сек. и всё - чистый лист. В самой Опере следующая настройка в настройке сети: localhost порт:3128 Использовать прокси для лок.серверов - стоит птица. Использовать HTTP 1.1. Короче хоть с птицами, хоть без - не работает
В досовском происходит следующее (последние четыре цифры увеличиваются до бесконечности):
NTLM authorization Proxy Server v0.9.8 at "xxxxxxxxx:3128". 2001-2002 (C) by Dmitry Rozmanov Connected from 127.0.0.1:2796 Connected from 127.0.0.1:2798 Connected from 127.0.0.1:2800 Connected from 127.0.0.1:2802 Connected from 127.0.0.1:2804 Connected from 127.0.0.1:2808 Connected from 127.0.0.1:2810 Connected from 127.0.0.1:2812 Connected from 127.0.0.1:2814 Connected from 127.0.0.1:2816 Connected from 127.0.0.1:2839 Connected from 127.0.0.1:2841 Connected from 127.0.0.1: и т.д.
# If you want APS to authenticate you at WWW servers using NTLM then just leave this # value blank like PARENT_PROXY: and APS will connect to web servers directly. # And NOTE that NTLM cannot pass through another proxy server. PARENT_PROXY:192.168.3.1 (это стоит в настройках IE в настройках LAN)
PARENT_PROXY_PORT:8080 (это стоит в настройках IE в настройках LAN)
# Set to 1 if you want to grant this authorization service to clients from other computers. # NOTE: all the users from other hosts that will be using you copy of APS for authentication # will be using your credentials in NTLM auth at the remote host. ALLOW_EXTERNAL_CLIENTS:0
# If you want to allow some other but not all computers to use your proxy for authorization, # just set ALLOW_EXTERNAL_CLIENTS:0 and put friendly IP addresses here. # Use space as a delimiter. # NOTE that special addesses don't work here (192.168.3.0 for example). FRIENDLY_IPS:
# Requested URLs are written to "url.log" file. May be useful. URL_LOG:0
# This section describes what and how the server should change in the clients headers. # Made in order to prevent parent proxy from seeing that you are using wget instead of IE5.5
# for windows 2000 emulation # User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT5)
# You can uncomment these chages in client's header to mimic IE5+ better, but in this case # you may expirience problems with *.html if your client does not really handle compression. #Accept-Encoding: gzip, deflate
# Optional value, if leaved blank then APS will use gethostname() to determine # host's name. # NOTE1: If you Linux host name differs from Windows host name then it may be that # MS server wont recognize you host at all and wont grant you access # to resources requested. Then you have to use this option and APS will use # this name in NTLM negotiations. # NOTE2: There are several reports that you can successfully use "foreign" host name # here. Say, if user may access a resource from 'host1' and may not from 'host2' # then there is a chance that APS running on 'host2' with NT_HOSTNAME:host1 will # be able to be granted access to the restricted resource. However use this on # you own risk as such a trick may be considered as a hack or something. NT_HOSTNAME:
# Windows Domain. # NOTE: it is not full qualified internet domain, but windows network domain. NT_DOMAIN:your_domain
# What user's name to use during authorization. It may differ form real current username. USER:
# Password. Just leave it blank here and server will request it at the start time. PASSWORD:your_nt_password
# These two options replace old FULL_NTLM option. # NTLM authentication consists virtually of two parts: LM and NT. Windows95/98 use # only LM part, WindowsNT/2000 can use NT and LM or just NT part. # Almost always using just LM part will be enough. I had several reports # about LM and NT requirement and no about just NT. # So try to setup 1, 1 only if you have enough reasons to do so and when you understand # what you are doing. # 0, 0 is an illegal combination # NOTE: if you change these options then you have to setup flag option accordingly. LM_PART:1 NT_PART:0
# Highly experimental option. See research.txt for details. # LM - 06820000 # NT - 05820000 # LM + NT - 07820000 NTLM_FLAGS: 06820000
# This option makes APS try to translate NTLM authentication to very usual "Basic" # scheme. Almost all http clients know it. With this option set to 1 user will be requested # by his browser to enter his credentials and these username and password will be used by # APS for NTLM authentication at MS Proxy server or Web server. # In such a case different users can use one runnig APS with their own credentials. # NOTE1: currently translation works so it allows only one try for entering # username/password. If you make a mistake you will have to restart you browser. # NOTE2: With debug:1 basic username/password will be written in log file in clear # text format. I could try hide it, but the basic scheme is so weak that anybody # who had access to APS would be able to get it. NTLM_TO_BASIC:0